2005-2008 Yaris · Service Manual SUSPENSION & AXLE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. REMOVE REAR WHEEL

2. REMOVE REAR ABSORBER CAP

3. REMOVE REAR SHOCK ABSORBER CAP

4. REMOVE REAR SHOCK ABSORBER
  1. Support the axle beam with a jack. Insert a wooden block between the jack and the rear axle spring seat to prevent damage.

  1. C106030
    Remove the 2 nuts while keeping the piston rod from rotating.

  1. Remove the cushion retainer and suspension support.

  1. C106031
    Remove the bolt while keeping the nut from rotating and remove the shock absorber.

    NOTICE:
    Remove the nut fromthe bolt side because the one on the lower side is a jam nut.


5. REMOVE REAR SUSPENSION SUPPORT STOPPER

6. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY
← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →