2005-2008 Yaris · Service Manual SUSPENSION & AXLE

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT FRONT SUSPENSION LOWER ARM

C107516
  1. As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.

  1. Using a torque wrench, turn the nut continuously at a rate of 2 to 4 seconds per turn and take the torque reading on the 5th turn.

    Torque:
    0.78 to 3.43 N*m{ 8 to 35 kgf*cm , 6.9 to 30 in.*lbf }

  1. Check for any cracks and grease leakage on the ball joint dust cover.

← REMOVAL (from Jan 2006)INSTALLATION (Aug 2005 – Dec 2005) →