INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT FRONT STABILIZER LINK ASSEMBLY |
![]() ![]() |
As shown in the illustration, flip the ball joint stud back and forth 5 times before installing the nut.
Using a torque wrench, turn the nut continuously at a rate of 3 to 5 seconds per turn and take the torque reading on the 5th turn.
- Torque:
- 1.0 N*m{ 10 kgf*cm , 8.9 in.*lbf } or less
Check for any cracks and grease leakage on the ball joint dust cover.


