2005-2008 Yaris · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Aug 2005


1. INSTALL RELEASE CYLINDER BLEEDER PLUG

Torque:
8.3 N*m{ 85 kgf*cm , 73 in.*lbf }


2. INSTALL CLUTCH RELEASE CYLINDER KIT
  1. Install the bleeder plug cap onto the bleeder plug.

  1. Install a new spring onto the cylinder body.

  1. CL00672E01
    Coat the parts with lithium soap base glycol grease, as shown in the illustration.

  1. Install the piston onto the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.

  1. Install the push rod onto the cylinder body.

  1. Install the boot onto the cylinder body.

← DISASSEMBLY (from Aug 2005)INSTALLATION (from Aug 2005) →