REASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL RELEASE CYLINDER BLEEDER PLUG |
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
| 2. INSTALL CLUTCH RELEASE CYLINDER KIT |
Install the bleeder plug cap onto the bleeder plug.
Install the spring onto the cylinder body.
Coat the parts with lithium soap base glycol grease, as shown in the illustration.

Install the piston onto the cylinder body.
- NOTICE:
- Do not damage the inside of the cylinder body.
Install the push rod onto the cylinder body.
Install the boot onto the cylinder body.
