REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1.
REMOVE MANUAL TRANSAXLE ASSEMBLY |
 |
(Click here)
| 2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
 |
Remove the clutch release fork with the clutch release bearing from the manual transaxle.
| 3.
REMOVE CLUTCH RELEASE FORK BOOT |
|
| 4.
REMOVE CLUTCH RELEASE BEARING ASSEMBLY |
 |
Remove the clutch release bearing from the clutch release fork.
| 5.
REMOVE RELEASE BEARING HUB CLIP |
|
| 6.
REMOVE RELEASE FORK SUPPORT |
 |
Remove the release fork support from the manual transaxle.
| 7.
REMOVE CLUTCH COVER ASSEMBLY |
 |
Align the matchmark on the clutch cover assembly with the one on the flywheel.
Loosen each set bolt one turn at a time until the spring tension is released.
Remove the set bolts and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 8.
REMOVE CLUTCH DISC ASSEMBLY |
|