2005-2008 Yaris · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. REMOVE MULTI-MODE MANUAL TRANSAXLE
(Click here)

2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

  1. C132153
    Remove the clutch release fork with the clutch release bearing from the multi-manual transaxle.


3. REMOVE CLUTCH RELEASE FORK BOOT

4. REMOVE CLUTCH RELEASE BEARING ASSEMBLY
  1. Remove the clutch release bearing from the clutch release fork.


5. REMOVE CLUTCH RELEASE FORK SUPPORT BOOT

  1. C132156
    Remove the clutch release fork support boot from the release fork support.


6. REMOVE RELEASE FORK SUPPORT

  1. C067604E04
    Remove the release fork support from the front transaxle case.

  1. Remove the release fork support from the manual transaxle.


7. REMOVE CLUTCH COVER ASSEMBLY

D025280E04
  1. Align the matchmark on the clutch cover assembly with the one on the flywheel.

  1. Loosen each set bolt one turn at a time until the spring tension is released.

  1. Remove the 6 set bolts and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.


8. REMOVE CLUTCH DISC ASSEMBLY
← COMPONENTS (from Nov 2005)INSPECTION (from Nov 2005) →