REMOVAL
Removal / installation · Vehicles built from Nov 2006
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
| 3. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() ![]() |
Remove bolt <F>.
Disengage the 2 clips and remove the console box rear.
| 4. DISCONNECT HEATED OXYGEN SENSOR CONNECTOR |
| 5. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Remove the 2 bolts and 2 compression springs.

Remove the 3 exhaust pipe supports and the front exhaust pipe assembly.

| 6. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR |
Remove the 2 bolts and nut and remove the No. 1 front floor heat insulator.
| 7. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
Disconnect the control shift cable from the shift lever.
Turn the lock to release it and separate the control shift cable from the shift lever retainer.
Remove the clip and disconnect the control select cable from the shift lever.
Turn the lock to release it and separate the control select cable from the shift lever retainer.
Remove the 2 clips and the 2 washers, and disconnect the 2 cables from the transaxle.

Remove the 2 clips and disconnect the 2 cables from the control cable bracket.
Remove the 3 nuts and remove the transmission control cable.


