2005-2008 Yaris · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


2. REMOVE BATTERY

3. REMOVE BATTERY TRAY

4. REMOVE BATTERY CARRIER

5. REMOVE BRAKE ACTUATOR (for LHD)

C121850
  1. Remove the clip and disconnect the wire harness.

  1. Move the lock lever in the direction indicated by the arrow to release the lock and disconnect the brake actuator connector from the actuator.

  1. C116914E01
    Using SST, separate the brake tube from the front flexible hose.
    SST
    09023-00100  

  1. C116915E01
    Using SST, separate the 2 brake tubes from the brake tube No. 1 way.
    SST
    09023-00100  

  1. C121690E01
    Using SST, separate the 2 brake tubes from the brake master cylinder.
    SST
    09023-00100  

  1. C116916
    Using SST, separate the 6 brake tubes from the brake actuator.
    SST
    09023-00100  

  1. C116917E01
    Use tags or labels to identify the place to reconnect each brake tube.

  1. C116918
    Disconnect the brake tube clamp.

  1. C116921
    Remove the 3 bolts and the actuator with bracket.


6. REMOVE BRAKE ACTUATOR (for RHD)

C107529
  1. Move the lock lever in the direction indicated by the arrow to release the lock and disconnect the brake actuator connector from the actuator.

  1. C107530
    Using SST, separate the 6 brake tubes from the brake actuator.
    SST
    09023-00100  

  1. C116919E01
    Use tags or labels to identify the place to reconnect each brake tube.

  1. C107531
    Remove the 3 bolts and the actuator with bracket.


7. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY

C116922E01
  1. Remove the 2 nuts and the bracket.

← COMPONENTS (from Aug 2005)INSTALLATION (from Aug 2005) →