REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1.
DRAIN BRAKE FLUID |
 |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 4.
REMOVE BATTERY CARRIER |
|
| 5.
REMOVE ABS AND TRACTION ACTUATOR (for LHD) |
 |
Remove the clip and disconnect the wire harness.
Slide the lock lever downward to release the lock and disconnect the connector from the actuator.
- Using SST, separate the brake tube from the front flexible hose.
- SST
- 09023-00100
- Using SST, separate the 2 brake tubes from the brake tube No. 1 way.
- SST
- 09023-00100
- Using SST, separate the 2 brake tubes from the brake master cylinder.
- SST
- 09023-00100
- Using SST, separate the 6 brake tubes from the brake actuator.
- SST
- 09023-00100
- Use tags or labels to identify the place to reconnect each brake tube.
- Disconnect the brake tube clamp.
- Remove the 3 bolts and the actuator with bracket.
| 6.
REMOVE ABS AND TRACTION ACTUATOR (for RHD) |
 |
Slide the lock lever downward to release the lock and disconnect the connector from the actuator.
- Using SST, separate the 6 brake tubes from the brake actuator.
- SST
- 09023-00100
- Use tags or labels to identify the place to reconnect each brake tube.
- Remove the 3 bolts and the actuator with bracket.
| 7.
REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY |
 |
Remove the 2 nuts and the bracket.