2005-2008 Yaris · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.


2. SEPARATE HOOD TO COWL TOP SEAL

  1. E113851
    Disengage the 7 clips and remove the hood to cowl top seal.


3. REMOVE COWL TOP NO. 1 VENTILATOR LOUVER CENTER (for LHD)

  1. A125670
    Disengage the 2 hooks and remove cowl top ventilator louver center No. 1.

  1. Disconnect the washer hose.


4. REMOVE COWL TOP NO. 2 VENTILATOR LOUVER CENTER (for RHD)

  1. A125782
    Disengage the 2 hooks and remove cowl top ventilator louver center No. 2.


5. REMOVE BATTERY

6. REMOVE BATTERY TRAY

7. REMOVE BATTERY CARRIER

8. SEPARATE BRAKE TUBE (for LHD)

C116914E01
  1. Using SST, separate the brake tube from the front flexible hose.

    SST
    09023-00100  

  1. C116915E01
    Using SST, separate the 2 brake tubes from the brake tube No. 1 way.
    SST
    09023-00100  

    NOTICE:
    To avoid breakage of the brake tube on the body side, hold the brake tube No. 1 way and remove the brake tube.

  1. C128963E01
    Using SST, separate the 2 brake tubes from the brake master cylinder.
    SST
    09023-38200  

  1. C128972
    Using SST, separate the 6 brake tubes from the brake actuator.
    SST
    09023-00100  
    09023-38200  

  1. C128973E01
    Use tags or labels to identify the place to reconnect each brake tube.

  1. C116918
    Disconnect the brake tube clamp.


9. SEPARATE BRAKE TUBE (for RHD)

C128975
  1. Using SST, separate the 6 brake tubes from the brake actuator.

    SST
    09023-00100  
    09023-38200  

  1. C128976E01
    Use tags or labels to identify the place to reconnect each brake tube.


10. REMOVE ABS AND TRACTION ACTUATOR

C128962
  1. While pressing the claw, move the lock lever in the direction of the arrow to release the lock and disconnect the actuator connector from the actuator.

  1. C128974
    Remove the 3 bolts and the actuator with bracket.


11. REMOVE BRAKE ACTUATOR BRACKET

C128977
  1. Remove the 3 bolts and the bracket.


12. REMOVE BRAKE ACTUATOR NO. 1 BRACKET

C130322
  1. Remove the 2 bolts and the bracket.

← COMPONENTS (from Nov 2005)INSTALLATION (from Nov 2005) →