2005-2008 Yaris · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Aug 2005

NOTICE:
Always use "Torx" socket wrench E10 when installing the rear seat.


1. INSTALL REAR SEAT INNER BELT ASSEMBLY LH

  1. B134905E01
    Install the rear seat inner belt LH with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Install the anchor plate with the arrow mark facing forward.
    2. Do not place the anchor plate over the location mark area of the floor panel.


2. INSTALL REAR SEAT INNER BELT ASSEMBLY RH

  1. B134910E01
    Install the rear seat inner belt RH with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Install the anchor plate with the arrow mark facing forward.
    2. Do not place the anchor plate over the location mark area of the floor panel.


3. INSTALL REAR SEAT CUSHION COVER PAD (for Bench Reclining Hold Down Seat Type)

  1. B117758
    Pass the rear seat inner belt through the slit in the rear seat cushion.

  1. Engage the 3 hooks and install the rear seat cushion.

    NOTICE:
    Make sure that the rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.

← REMOVAL (from Aug 2005)COMPONENTS (from Nov 2005) →