REMOVAL
Removal / installation · Vehicles built from Aug 2005
- NOTICE:
- Always use "Torx" socket wrench E10 when removing the rear seat.
| 1. REMOVE REAR SEAT CUSHION COVER PAD (for Bench Reclining Hold Down Seat Type) |
Hold the front edge of the rear seat cushion and lift it up, as shown in the illustration, to disengage the the 2 rear seat cushion lock hooks.

- NOTICE:
- Hold the area around the rear seat cushion hooks so as to avoid deforming the rear seat cushion frame.
Pass the rear seat inner belt through the slit in the rear seat cushion, disengage the hook between the rear seat cushion and rear seat back, and remove the rear seat cushion.
| 2. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY LH |
Remove the bolt and the rear center seat inner belt LH.

| 3. REMOVE REAR CENTER SEAT INNER BELT ASSEMBLY RH |
Remove the bolt and the rear center seat inner belt RH.

