REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 3. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() ![]() |
Disengage the 6 claws and remove the shifting hole cover.
| 4. REMOVE CONSOLE BOX REAR COVER |
![]() ![]() |
Disengage the 8 claws and remove the console box rear cover.
| 5. REMOVE CONSOLE BOX CARPET |
![]() ![]() |
Remove the console box carpet.
| 6. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() ![]() |
Remove the bolt and disengage the 2 clips to remove the console box.
| 7. LOOSEN NO. 1 WIRE ADJUSTING NUT |
![]() ![]() |
Loosen the lock nut and the adjusting nut.
| 8. DISCONNECT PARKING BRAKE NO. 3 CABLE ASSEMBLY |
Disconnect the parking brake cable from the parking brake equalizer.
| 9. DISCONNECT PARKING BRAKE NO. 2 CABLE ASSEMBLY |
Disconnect the parking brake cable from the parking brake equalizer.
| 10. REMOVE PARKING BRAKE LEVER |
Disconnect the parking brake switch connector.
Remove the 3 bolts and remove the parking brake lever.

Remove the lock nut and adjusting nut to remove the parking brake pull rod and parking brake equalizer.

| 11. REMOVE PARKING BRAKE SWITCH |
![]() ![]() |
Remove the screw and remove the parking brake switch.






