INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL PARKING BRAKE SWITCH |
![]() ![]() |
Install the parking brake switch with the screw.
- Torque:
- 0.9 N*m{ 9 kgf*cm , 8 in.*lbf }
Connect the parking brake switch connector.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
Engage the 4 claws and install the rear console box.

Install the 2 bolts and 2 screws.
Connect the clamp.
| 3. INSTALL CONSOLE BOX CARPET |
Install the console box carpet.

| 4. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
Connect the connector.

Engage the 3 clips and 3 claws and install the console upper rear panel.
| 5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Engage the 5 clips and the claw and install the upper console panel.

| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
Install the shift lever knob.

| 7. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
![]() ![]() |
Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.
| 8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


