2005-2008 Yaris · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT PARKING BRAKE SWITCH
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 - Ground
      Released
      Below 1 Ω
      1 - Ground
      Pushed in
      10 kΩ or higher

      If the result is not as specified, replace the parking brake switch.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →