ADJUSTMENT
Removal / installation · Vehicles built from Nov 2005
| 1. ADJUST CLEARANCE BETWEEN BRAKE SHOES AND DRUM (for Rear Drum Brake) |
- NOTICE:
- Do not use screwdrivers or any other tools to rotate the adjuster.
Press the brake pedal 30 times (not the parking brake). The clearance between the brake shoes and drum will be adjusted automatically.
| 2. INSPECT PARKING BRAKE LEVER TRAVEL |
Slowly pull the parking brake lever to the fully applied position, counting the number of clicks.
- Parking brake lever travel at 200 N (20 kgf, 45 lbf):
Rear Brake type
Number of clicks
Drum
5 to 8
Disc
4 to 7
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
| 4. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() ![]() |
Disengage the 6 claws and remove the shifting hole cover.
| 5. REMOVE CONSOLE BOX REAR COVER |
![]() ![]() |
Disengage the 8 claws and remove the console box rear cover.
| 6. REMOVE CONSOLE BOX CARPET |
![]() ![]() |
Remove the console box carpet.
| 7. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() ![]() |
Remove the bolt and disengage the 2 clips to remove the console box.
| 8. ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Drum Brake) |
Completely release the parking brake lever.
Turn the adjusting nut until the parking brake lever travel is corrected to within the specified range.

- Parking brake lever travel:
- 5 to 8 clicks at 200 N (20 kgf 45 lbf)
Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
Check whether the parking brake drags or not.
When operating the parking brake lever, check that the brake warning light illuminates.
- Standard:
- Brake warning light always illuminates at the first click.
| 9. ADJUST PARKING BRAKE LEVER TRAVEL (for Rear Disc Brake) |
Completely release the parking brake lever.
Loosen the adjusting nut to completely release the parking brake cable.
Strongly step on the brake pedal 3 to 5 times with the engine stopped.
Turn the new adjusting nut until the parking brake lever travel is corrected to within the specified range.

- Parking brake lever travel:
- 4 to 7 clicks at 200 N (20 kgf 45 lbf)
Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
Check whether the parking brake drags or not.
Release the parking brake lever and check that the clearance measurement between the rear disc brake cylinder operation lever and the stopper is within the specified range.

- Clearance:
- 0 to 0.5 mm (0 to 0.02 in.)
When operating the parking brake lever, check that the brake warning light illuminates.
- Standard:
- Brake warning light always illuminates at the first click.
| 10. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() ![]() |
Engage the 2 clips and install the console box with the bolt.
| 11. INSTALL CONSOLE BOX CARPET |
![]() ![]() |
Install the console box carpet.
| 12. INSTALL CONSOLE BOX REAR COVER |
![]() ![]() |
Engage the 8 claws to install the console box rear cover.
| 13. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transaxle) |
![]() ![]() |
Engage the 6 claws to install the shifting hole cover.
| 14. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |




