2005-2008 Yaris · Service Manual BODY

DISPOSAL

Removal / installation · Vehicles built from Aug 2005

HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.


1. DISPOSE OF BACK DOOR STAY ASSEMBLY

B065104E02
  1. Horizontally fix the stay in a vise with the piston-rod pulled out.

  1. Wearing protective glasses, gradually cut the shaded part between A and B, shown in the illustration, using a metal saw to gradually release the gas.

    Specification:
    Area
    Measurement
    a
    80 mm (3.15 in.)
    b
    20 mm (0.80 in.)

    CAUTION:
    1. Cover the area that is being cut with a shop rag or a piece of cloth because there is a possibility that metal shards may be dispersed by the gas.
    2. The gas is colorless, odorless and harmless.

← INSTALLATION (from Aug 2005)COMPONENTS (from Jan 2006) →