INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1.
INSTALL FRONT AXLE HUB BOLT |
 |
Install the washer and the nut onto a new hub bolt, as shown in the illustration.
Using a screwdriver or the equivalent to hold the axle hub, install the hub bolt by tightening the nut.
| 2.
INSTALL FRONT DISC
|
 |
Align the matchmarks of the disc and axle hub and install the disc.
- NOTICE:
- When replacing the disc, select the position that gives the minimum disc runout.
| 3.
INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY
|
 |
Install the disc brake caliper onto the steering knuckle.
-
Torque:
- 107 N*m{
1,089 kgf*cm
, 79 ft.*lbf
}
| 4.
INSTALL FRONT WHEEL |
 |
-
Torque:
- 103 N*m{
1,050 kgf*cm
, 76 ft.*lbf
}