2005-2008 Yaris · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL FRONT AXLE HUB BOLT

C130304E01
  1. Install the washer and the nut onto a new hub bolt, as shown in the illustration.

  1. Using a screwdriver or the equivalent to hold the axle hub, install the hub bolt by tightening the nut.


2. INSTALL FRONT DISC

C108932E01
  1. Align the matchmarks of the disc and axle hub and install the disc.

    NOTICE:
    When replacing the disc, select the position that gives the minimum disc runout.


3. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

C130306
  1. Install the disc brake caliper onto the steering knuckle.

    Torque:
    107 N*m{ 1,089 kgf*cm , 79 ft.*lbf }


4. INSTALL FRONT WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }

← REMOVAL (from Nov 2005)COMPONENTS (from Jan 2006) →