2005-2008 Yaris · Service Manual SUSPENSION & AXLE

INSTALLATION

Removal / installation · Vehicles built from Jan 2006


1. INSTALL FRONT AXLE HUB BOLT

G031913E01
  1. Install the washer and the nut onto a new hub bolt, as shown in the illustration.

  1. Using a screwdriver or the equivalent to hold the axle hub, install the hub bolt by tightening the nut.


2. INSTALL FRONT DISC

C108932E01
  1. Align the matchmarks of the disc and axle hub and install the disc.

    NOTICE:
    When replacing the disc, select the position that gives the minimum disc runout.


3. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY

C085618
  1. Install the disc brake caliper onto the steering knuckle.

    Torque:
    107 N*m{ 1,089 kgf*cm , 79 ft.*lbf }


4. INSTALL FRONT WHEEL

Torque:
103 N*m{ 1,050 kgf*cm , 76 ft.*lbf }

← REMOVAL (from Jan 2006)COMPONENTS (from Aug 2005) →