ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT FUEL CUT-OFF RPM |
Start and warm up the engine.
Increase the engine speed to approximately 3,500 rpm.
Using a sound scope, check the operation sound of the injector.
Release the throttle lever. Check that the operation noise stops momentarily and then resumes.
| VISUALLY INSPECT HOSES, CONNECTIONS AND GASKETS |
![]() ![]() |
Check that there are no cracks, leakage or scratches on the hoses, connections or gaskets.
- HINT:
- Removing the oil level gauge, oil filter cap or PCV hose may cause the engine to malfunction or stall.
- Disconnections, looseness or cracks in the parts of the air induction system between the intake system and cylinder head will allow air suction and cause the engine to run improperly.
- Removing the oil level gauge, oil filter cap or PCV hose may cause the engine to malfunction or stall.


