2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL HEATED OXYGEN SENSOR

A115451
  1. Using SST, install the sensor onto the front exhaust pipe.

    SST
    09224-00010  

    Torque:
    44 N*m{ 449 kgf*cm , 32 ft.*lbf }

  1. A115450
    Connect the sensor connector and engage the 3 clamps.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


3. CHECK FOR EXHAUST GAS LEAKAGE
← INSPECTION (from Aug 2005)COMPONENTS (from Aug 2005) →