2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Aug 2005 – Dec 2005

Versions by build date: Aug 2005 – Dec 2005 from Jan 2006


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

3. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Manual Transmission)

C109005E01
  1. Disengage the 6 claws and remove the shifting hole cover.


4. REMOVE CONSOLE BOX REAR COVER

C109006E01
  1. Disengage the 8 claws and remove the console box rear cover.


5. REMOVE CONSOLE BOX ASSEMBLY REAR

C116873
  1. Remove the bolt and disengage the 2 clips to remove the console box.


6. REMOVE HEATED OXYGEN SENSOR
  1. Disconnect the sensor connector.

  1. Remove the grommet and pass the sensor connector out of the cabin through the floor panel.

  1. A115424
    Using SST, remove the heated oxygen No. 2 sensor.
    SST
    09224-00010  

← COMPONENTS (from Jan 2006)REMOVAL (from Jan 2006) →