2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT INTEGRATION RELAY

A107023E03
  1. Inspect EFI (20A) fuse.

    1. Disconnect the fuse.

    2. Using an ohmmeter, measure the resistance of the fuse.

      Standard resistance:
      Tester Connection
      Specified condition
      1 - 2
      Below 1 Ω

  1. Inspect EFI relay.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified condition
      A1 - C1
      Below 1 Ω
      A1 - A4
      10 kΩ or higher
      A4 - C1
      10 kΩor higher
      A1 - A4
      Below 1 Ω
      (Apply battery voltage between terminals A2 and A3)
      A4 - C1
      Below 1 Ω
      (Apply battery voltage between terminals A2 and A3)

      NOTICE:
      While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.

← REMOVAL (from Aug 2005)INSTALLATION (from Aug 2005) →