REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE RELAY BLOCK COVER NO. 1 |
![]() ![]() |
Open the instrument panel box.
Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.
Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.
| 3. REMOVE INTEGRATION RELAY |
![]() ![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.
Disconnect the 3 connectors.



