2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE RELAY BLOCK COVER NO. 1

B108188E01
  1. Open the instrument panel box.

  1. Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.

  1. Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.


3. REMOVE INTEGRATION RELAY

A115400
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the integration relay.

  1. Disconnect the 3 connectors.

← COMPONENTS (from Nov 2005)INSPECTION (from Nov 2005) →