INSTALLATION
Removal / installation · Vehicles built from Aug 2005
- NOTICE:
- Avoid any physical shock to the accelerator pedal.
- Do not disassemble the accelerator pedal.
- Avoid any physical shock to the accelerator pedal.
| 1. INSTALL ACCELERATOR PEDAL ASSEMBLY |
![]() ![]() |
Install the accelerator pedal with the 2 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm , 7.4 ft.*lbf }
Connect the accelerator pedal connector.
| 2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 1 |
![]() ![]() |
Engage the 2 claws and install instrument panel undercover No. 1.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



