2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2006


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

  1. B108140E02
    Remove the 2 screws.

  1. Disengage the 2 claws and remove the No. 1 instrument panel undercover.


3. REMOVE ACCELERATOR PEDAL ASSEMBLY
  1. Disconnect the accelerator pedal connector.

  1. A115383
    Remove the 2 bolts and accelerator pedal.

    NOTICE:
    1. Do not drop or strike the accelerator pedal.
    2. Do not disassemble the accelerator pedal.

← ON-VEHICLE INSPECTION (from Nov 2006)INSTALLATION (from Nov 2006) →