2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE CYLINDER HEAD COVER NO. 2

A116235
  1. Remove the 4 nuts and cylinder head cover No. 2.


4. REMOVE FAN AND GENERATOR V BELT

  1. A116197E01
    Loosen bolts A and B.

  1. Release the fan and generator V belt tension and remove the fan and generator V belt.


5. REMOVE FAN BELT ADJUSTING BAR

A115508
  1. Remove the bolt and nut and remove the fan belt adjusting bar.


6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

A116177
  1. Disconnect the camshaft timing oil control valve assembly connector.

  1. A116178
    Remove the bolt and nut and remove the camshaft timing oil control valve assembly.

  1. A116179
    Remove the O-ring from the camshaft timing oil control valve assembly.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →