2005-2008 Yaris · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT CANISTER

A119220
  1. Separate the purge hose.

  1. A125131
    Separate the No. 1 canister outlet hose sub-assembly.

  1. A106962E02
    Inspect the ventilation of the canister.

    1. Open the fuel tank cap, apply compressed air into the purge hose and check that the air flows out from the No. 1 canister outlet hose sub-assembly.

    2. A119187E01
      Open the fuel tank cap, apply compressed air into the No. 1 canister outlet hose sub-assembly and check that the air flows out from the purge hose.

  1. A119132E01
    Inspect the check valve.

    1. A106963E02
      Open the fuel tank cap, close the No. 1 canister outlet hose sub-assembly (C) and apply compressed air into the purge hose (B).

      Standard:
      Air does not flow at first. By gradually increasing the pressure, air flows when the pressure in the port reaches the specified level.

    2. A106961E02
      Open the fuel tank cap and close the No. 1 canister outlet hose sub-assembly (C). Using a hand-held vacuum pump, apply a vacuum to the purge hose (B).

      Standard:
      The vacuum is maintained at first. By gradually increasing the vacuum, air flows and the vacuum decreases after the vacuum reaches the specified level.

← COMPONENTS (from Nov 2006)REMOVAL (from Nov 2006) →