INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT INTEGRATION RELAY |
![]() ![]() |
Inspect the cooling fan relay.
Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Terminals
Specified condition
B5 - B8
10 kΩ or higher
B5 - B8
Below 1 Ω
(Apply battery voltage between terminals B6 and B7)
- NOTICE:
- While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.


