2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT INTEGRATION RELAY

A125205E01
  1. Inspect the cooling fan relay.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Terminals
      Specified condition
      B5 - B8
      10 kΩ or higher
      B5 - B8
      Below 1 Ω
      (When battery voltage applied to terminals B6 and B7)

      NOTICE:
      While using the battery for the inspection, do not bring the positive and negative tester probes too close to each other as a short circuit may occur.

← REMOVAL (from Nov 2006)INSTALLATION (from Nov 2006) →