INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL CAMSHAFT POSITION SENSOR |
![]() ![]() |
Apply a light coat of engine oil to the O-ring on the camshaft position sensor.
Install the camshaft position sensor with the bolt.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
- NOTICE:
- Do not twist the O-ring.
Connect the camshaft position sensor connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 3. CHECK FOR ENGINE OIL LEAKAGE |


