2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY (for Rough Road Area Specification Vehicles)

4. REMOVE CRANKSHAFT POSITION SENSOR

A091817
  1. Disconnect the crankshaft position sensor connector.

  1. Remove the bolt and remove the crankshaft position sensor.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →