2005-2008 Yaris · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Aug 2005


1. REMOVE OIL PUMP SEAL

A035281
  1. Using a screwdriver with its tip wrapped in protective tape, remove the oil pump seal.


2. INSTALL OIL PUMP SEAL

A037153
  1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover edge.

    SST
    09950-60010   (09951-00250, 09951-00410, 09952-06010)
    09950-70010   (09951-07100)

    NOTICE:
    Do not tap the oil seal at an angle.

  1. Apply a light coat of MP grease to the oil pump seal lip.

    NOTICE:
    Keep the lip free of foreign matter.

← INSPECTION (from Aug 2005)REASSEMBLY (from Aug 2005) →