2005-2008 Yaris · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2005


1. DRAIN ENGINE COOLANT

NOTICE:
To avoid the danger of being burned, do not remove the radiator cap sub-assembly while the engine and radiator assembly are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator assembly.

  1. Loosen the radiator drain cock plug.

  1. Remove the radiator cap sub-assembly.

  1. Loosen the cylinder block drain cock plug, then drain the coolant.

    A106596E01


2. REMOVE WATER INLET

A116186
  1. Remove the 2 nuts and separate the water inlet with radiator hose from the cylinder block.


3. REMOVE THERMOSTAT

A116187
  1. Remove the thermostat from the cylinder block.

  1. Remove the gasket from the thermostat.

← COMPONENTS (from Aug 2005)INSPECTION (from Aug 2005) →