REMOVAL
Removal / installation · Vehicles built from Jan 2006
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
- Use the same procedure for both the RH and LH sides.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT FENDER LINER |
Remove the 3 screws and remove the front side of the front fender liner.

| 3. REMOVE FOG LIGHT ASSEMBLY |
Disconnect the connector.

Remove the 3 screws, then remove the fog light.
Turn the fog light bulb, in the direction indicated by the arrow in the illustration, to remove it.

