INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1.
INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY |
 |
Engage the 2 claws and install the high mounted stop light.
| 2.
INSTALL CENTER STOP LIGHT COVER |
 |
Connect the connector.
Engage the 2 claws.
- Install the center stop light cover with the 2 screws.
- NOTICE:
- When reusing the center stop light cover, replace the screws with 90159-60303 screws to avoid insecure installation.
- Engage the 4 claws and install the rear light cover.
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}