2005-2008 Yaris · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jan 2006


INSPECT STOP LIGHT SWITCH

  1. B113724E04
    Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Switch pin released
      Below 1 Ω
      3 - 4
      10 kΩ or higher
      1 - 2
      Switch pin pushed in
      10 kΩ or higher
      3 - 4
      Below 1 Ω

      If the result is not as specified, replace the stop light switch.

← REMOVAL (from Jan 2006)INSTALLATION (from Jan 2006) →