INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1.
INSTALL FRONT DOOR COURTESY SWITCH |
 |
Connect the connector.
Using "Torx" socket wrench T30, install the front door courtesy switch with the screw.
-
Torque:
- 3.7 N*m{
38 kgf*cm
, 33 in.*lbf
}
| 2.
INSTALL CENTER PILLAR GARNISH LOWER
|
 |
- Engage the 2 clips and 3 claws and install the center pillar lower garnish.
| 3.
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP |
 |
Install the rear door opening trim weatherstrip.
| 4.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP |
 |
Install the front door opening trim weatherstrip.
| 5.
INSTALL REAR DOOR SCUFF PLATE
|
 |
- Engage the 7 claws and install the rear door scuff plate.
| 6.
INSTALL FRONT DOOR SCUFF PLATE
|
 |
- Engage the 11 claws and install the front door scuff plate.
| 7.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}