REMOVAL
Removal / installation · Vehicles built from Aug 2005
- HINT:
- Use the same procedure for both the RH and LH sides.
- The procedure described below is for the LH side.
- Use the same procedure for both the RH and LH sides.
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP |
![]() ![]() |
Remove the rear door opening trim weatherstrip.
| 3. REMOVE REAR DOOR COURTESY SWITCH |
![]() ![]() |
Disconnect the connector.
Using "Torx" socket wrench T30, remove the screw and the rear door courtesy switch.



