INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1.
INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY |
 |
Engage the 2 claws and install the power window regulator switch.
| 2.
INSTALL FRONT ARMREST BASE PANEL UPPER |
 |
Connect the connector.
Engage the 5 claws and clip and install the front armrest base panel upper.
| 3.
INSTALL DOOR ARMREST COVER
|
 |
for 5 Door:
Engage the 8 claws and 3 clips and install the door armrest cover.
- for 3 Door:
Engage the 12 claws and 4 clips and install the door armrest cover.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}