REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE DOOR ARMREST COVER
|
 |
for 5 Door:
Using a screwdriver with its tip wrapped in protective tape, disengage the 8 claws and 3 clips and remove the door armrest cover.
- for 3 Door:
Disengage the 12 claws and 3 clips and remove the door armrest cover.
| 3.
REMOVE FRONT ARMREST BASE PANEL UPPER |
 |
Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and clip and remove the front armrest base panel upper.
Disconnect the connector.
| 4.
REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY |
 |
Disengage the 2 claws and remove the power window regulator switch.