INSPECTION
Inspection · Vehicles built from Jan 2006
| INSPECT REAR DOOR LOCK ASSEMBLY LH |
![]() ![]() |
Check the operation.
Apply battery voltage to the rear door lock and check the operation of the door lock motor.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locks
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocks
Check the resistance of the unlock detection switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Door Lock Condition
Specified Condition
6 - 9
Locked
10 kΩ or higher
6 - 9
Unlocked
Below 1 Ω
| INSPECT REAR DOOR LOCK ASSEMBLY RH |
![]() ![]() |
Check the operation.
Apply battery voltage to the rear door lock and check the operation of the door lock motor.
- Standard:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Locks
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Unlocks
Check the resistance of the unlock detection switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Door Lock Condition
Specified Condition
6 - 9
Locked
10 kΩ or higher
6 - 9
Unlocked
Below 1 Ω



