REMOVAL
Removal / installation · Vehicles built from Aug 2005
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE ENGINE UNDER COVER RH |
| 3. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY (for Rough Road Area Specification Vehicles) |
| 4. REMOVE FAN AND GENERATOR V BELT |
Loosen bolts A and B.

Release the fan and generator V belt tension and remove the fan and generator V belt.
| 5. REMOVE GENERATOR ASSEMBLY |
![]() ![]() |
Remove the terminal cap.
Separate the connector and harness clamp.
Remove the nut and remove terminal B.
Remove fan belt adjusting slider fixing bolts A and B and remove the fan belt adjusting slider.

Remove fixing bolt B and remove the generator.


