2005-2008 Yaris · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Aug 2005


1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

A104680E02
  1. Apply a light coat of spindle oil or gasoline to a new O-ring and install it onto the fuel pressure pulsation damper.

  1. Install the fuel pressure pulsation damper onto the fuel delivery pipe.

  1. A116515
    Install the clip.


2. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

A104300
  1. Remove the air cleaner filter element from the cylinder head cover.


3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

A116530E01
  1. Install the air cleaner cap with the 2 clamps.

  1. Tighten the 4 clamps.


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }


5. CHECK FOR FUEL LEAKAGE
← REMOVAL (from Aug 2005)COMPONENTS (Aug 2005 – Oct 2005) →