2005-2008 Yaris · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jan 2006

HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE REAR DOOR BELT MOULDING

  1. B134880E03
    Apply protective tape to the door panel in the periphery of the rear door belt moulding.

  1. B134881E02
    Using a moulding remover, disengage the 5 claws and remove the rear door belt moulding.

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →