2005-2008 Yaris · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jan 2006

HINT:
The procedure described below is for the LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE FRONT PILLAR UPPER COVER

  1. B134846E01
    Apply protective tape, as shown in the illustration.

  1. B134847
    Using a moulding remover, disengage the 2 clips and claw and remove the front pillar upper cover.

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →