2005-2008 Yaris · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jan 2006

HINT:
The procedure described below is for LH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.


1. REMOVE ROOF DRIP SIDE FINISH MOULDING

  1. B138358E01
    Apply protective tape, as shown in the illustration.

  1. B134857
    Disengage the 2 clips and remove the roof drip side finish moulding.

    NOTICE:
    1. Do not remove the clips.
    2. Replace the clips with supply clips if damaged.

← COMPONENTS (from Jan 2006)INSTALLATION (from Jan 2006) →